| * |
Assembling Step 2 - leg, feet |
|
| |
|
|
| |
Caution for assembling
Ball joint dolls are designed so each joints function whilst connected with very strong tension cord.
Good attention is necessary when dismantling and assembling the product, and it can be extremely dangerous to play with the tension cord towards the eyes.
Also, be careful as injury may occur if part of your body gets caught between the doll¡¯s joints due to the elasticity of tension cord during operation. If injury occurs get medical check by health care professional. |
|
| |
|
|
| * |
Photos may be different to the actual product, and the skin tone and makeup may appear different depending on your monitor settings. |
|
| |
Model: Male, Skin: Natural type |
|
| |
 |
|
- Separate puller from the cords and insert the leg parts in order.
(Separate leg parts to calf and thigh parts, and insert all calf parts to one puller and thigh parts to the other puller) |
|
| |
|
|
|
|
| |
 |
|
- Hook tension cord to the puller with thigh parts. |
|
| |
|
|
|
|
| |
 |
|
- Gently push thigh parts towards the hip from the puller. |
|
| |
|
|
|
|
| |
 |
|
- Push thigh parts towards the hip entirely and remove puller from tension cord. Before removing puller, hold the cord steadily with your hand as shown on the photo, so it does not go inside due to elasticity. |
|
| |
|
|
|
|
| |
 |
|
- Hook tension cord to the puller with calf parts as shown. |
|
| |
|
|
|
|
| |
 |
|
- Pull gently so the puller hook does not scratch knee joint, and move calf parts towards the thigh with the hand supporting thigh as shown. |
|
| |
|
|
|
|
| |
 |
|
- With one hand support the calf part, pass the puller by gently pulling onto it, so it does not scratch the ankle joint. |
|
| |
|
|
|
|
| |
 |
|
- Support the ankle with one hand, and pull the puller as hard as possible. |
|
| |
|
|
|
|
| |
 |
|
- Hold the cord firmly with the hand supporting the ankle as shown. |
|
| |
|
|
|
|
| |
 |
|
- Separate the puller from tension cord. |
|
| |
|
|
|
|
| |
 |
|
- Hold the foot correctly. (L, R initial is engraved) |
|
| |
|
|
|
|
| |
 |
|
- Insert the cord to the foot hook. |
|
| |
|
|
|
|
| |
 |
|
- Pull tightly after hooking cord to the foot part. (Make sure the cord is fitted correctly to the foot hook.) |
|
| |
|
|
|
|
| |
 |
|
- Slowly let go of the cord, taking note of the direction of the ankle parts. |
|
| |
|
|
|
|
| |
 |
|
- Set ankle and foot parts correctly as shown. |
|
| |
|
|
|
|
| |
 |
|
- Finished. Do the same to the other leg. |
|
